Hyundai Tucson: Key Ignition Switch / Turning Off the Engine
1. Stop the vehicle and depress the brake pedal fully.
2. Make sure the shift lever/button is in P (Park).
3. Turn the ignition switch to the LOCK position and apply the Electronic Parking Brake (EPB).
4. Take the key with you when you leave the vehicle.
Starting the Engine
WARNING
Always wear appropriate shoes when
operating your vehicle. Unsuitable
shoes such as high heels, ski boots,
sandals, and flip-flops may interfere
with your ability to use the br ...
Push Button Start Ignition Switch
Whenever the front door is opened,
the Push Button Start ignition switch
illuminates and goes off 30 seconds after
the door is closed.
WARNING
To turn off the vehicle in an emergency:
Press ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Calibrating the Battery Sensor
If the AGM battery is reconnected or
replaced, the ISG system does not
operate immediately. If you want to use
the system, the battery sensor needs to
be calibrated following the procedure.
1. Turn off the engine.
2. Disconnect all electronic devices
that were additionally installed afte ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Repair procedures
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the heater control unit.(Refer to Heating, Ventilation And Air Conditioning - "Heater Control Unit")
3.Remove the IBU (A) after loosening mounting bolt, nut and screw.
4.Disconnect IBU connectors and then remove the IBU (A) ...
