.png)
1 Driver’s door power window switch
2 Front passenger’s door power window
switch
3 Rear door (left) power window switch
4 Rear door (right) power window switch
5 Window opening and closing
6 Automatic power window
(if equipped)
7 Power window lock button
The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control the door’s window. The driver has a Power Window Lock button that can block the operation of rear passenger windows. The power windows will operate for about 3 minutes after the ignition is turned OFF or if the ignition is placed in the ACC position, as long as the front doors remain closed.
If the front doors are opened, the battery power is turned OFF and the Power Windows do not operate.
Window opening and closing
.png)
To open:
Press the window switch down to the first detent position
Side View MirrorsHyundai Tucson (NX4) 2022-2026 Service Manual: Front Wheel Speed Sensor
- Components
1. Front wheel speed sensor2. Front wheel speed sensor connector
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to Gen ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor uses the wideside
view cameras to display the rear
blind spot area of your vehicle on the
instrument cluster when the turn signal
is turned on.
Information
Refer to the "Driver Assistance Sensors"
section in this chapter for the location
and the general precau ...