Hyundai Tucson: How to Save/Delete the Digital Key (Card Key) / Starting the engine
.png)
A : Vehicle authentication pad (Wireless charging pad)
1. After placing your registered card key on the vehicle authentication pad (wireless charging pad), depress the brake pedal and press the Button Start ignition switch button.
2. After start-up, the digital key data will be automatically updated within 5 to 20 seconds. Remove the digital key (card key) from the pad.
Information
- If you do not place the digital key (card key) on the center of the vehicle authentication pad (wireless charging pad), the engine may not start. Remove the digital key (card key) and then try again.
- If the digital key (card key) is near other NFC-enabled cards such as a transportation card or credit card, it may not be recognized. For more information, refer to the “Button Start Ignition Switch” section in Chapter 6.
- Always remove the digital key (card key) from the vehicle authentication pad (wireless charging pad) after turning on the engine. If you place the card key on the wireless charging pad while driving, the digital key (card key) may malfunction.
Locking/Unlocking the doors
A : Door handle authentication pad,
B : NFC Antenna
To unlock:
Place the digital key (card key) near the
door handle authentication pad of the
driver or passenger side door for about 2
sec ...
Disabling Digital Key
If you do not want to use the digital key
(smartphone key and card key), disable
the function temporarily. Have the smart
key in the vehicle to change the settings.
From the Settings menu, go ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Intelligent Speed Limit Assist
Operation
Intelligent Speed Limit Assist may warn
and control your vehicle by "Displaying
speed limit", "Warning overspeed" , and
"Changing set speed".
Information
Intelligent Speed Limit operation is
described based on the offset adjusted
to "0". For more information on setting
the offset, refe ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Evaporator Core
- Replacement
1.Disconnect the negative (-) battery terminal.
2.Remove the heater core.(Refer to Heater - "Heater Core")
3.Loosen the mounting screws and remove the evaporator core cover (A).
4.Remove the evaporator core (A) from the heater unit.
5.Remove the evaporator temperature sens ...
