To install a LATCH-compatible Child Restraint System in either of the rear outboard seating positions:
1. Move the seat belt buckle away from the lower anchors.
2. Move any other objects away from the anchorages that could prevent a secure connection between the Child Restraint System and the lower anchors.
3. Place the Child Restraint System on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the Child Restraint System manufacturer.
4. Follow the instructions of the Child Restraint System’s manufacturer for proper installation and connection of the lower attachments on the Child Restraint System to the lower anchors.
WARNING
Take the following precautions when using the LATCH system:
WARNING
Make sure that the combined weight of the child and the child restraint system is less than 65 lbs. (30 kg) for each LATCH system.
Hyundai Tucson (NX4) 2022-2025 Service Manual: Crankcase Check Valve
- Removal and Installation
• Be careful not to damage the parts located under the vehicle
(floor under cover, canister, fuel tank) when raising the vehicle using
the lift.(Refer to General Information - "Lift and Support Points")
1.Disconnect the battery (-) terminal.
...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Engine Number. Refrigerant Label.
Operation In Foreign Countries
Engine Number
The engine number is stamped on the
engine block as shown in the drawing.
Refrigerant Label
The refrigerant label provides
information such as refrigerant type and
amount.
Operation In Foreign Countries
If you are going to drive your vehicle in
another country, be sure ...