Rear Cross-Traffic Collision- Avoidance Assist malfunction
When the Rear Cross-Traffic Collision-
Avoidance Assist is not working properly,
the "Check Rear Cross-Traffic Safety
system" warning message may appear,
and the
warning light may illuminate
on the instrument cluster. Have the
vehicle inspected by an authorized
HYUNDAI dealer.
When the side view mirror warning
light is not working properly, the
"Check side view mirror warning light"
warning message may appear, and the
warning
light may illuminate on the
instrument cluster. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
Rear Cross-Traffic Collision- Avoidance Assist disabled
If the rear corner radar is blocked or covered, or when the rear bumper around the rear corner radar or sensor is covered by any foreign material, such as snow, rain, or dirt, or when a trailer or hitch mounted carrier is installed, the detecting performance may reduce and temporarily limit or disable Rear Cross- Traffic Collision-Avoidance Assist.
The "Rear Cross-Traffic Safety system disabled. Radar blocked" warning message may appear on the instrument cluster.
The function operates normally when such foreign material, trailer, or carrier is removed, and the engine is restarted.
If the function does not operate normally after anything covering or blocking the sensors is removed, have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
Limitations of Rear Cross-Traffic Collision-Avoidance Assist
Rear Cross-Traffic Collision-Avoidance Assist may not operate normally, or may operate unexpectedly if:
Braking may not be assisted if:
Information
For more information on the limitations of the rear corner radar, refer to the "Blind-Spot Collision-Avoidance Assist (BCA)" section in this chapter.
WARNING
A: Structure
Rear Cross-Traffic Collision-Avoidance Assist may be limited when driving near another vehicle or a structure, and it may not detect the vehicle approaching from the left or right. The function may not activate a warning or brake your vehicle
Always check your surroundings while backing up.
Rear Cross-Traffic Collision-Avoidance Assist may detect vehicles that are parking or pulling out near your vehicle (e.g. leaving beside your vehicle, parking or pulling out behind your vehicle, approaching your vehicle making a turn). If this occurs, the function may activate a warning and brake your vehicle even when not needed.
Always check your surroundings while backing up.
A: Vehicle
Rear Cross-Traffic Collision-Avoidance Assist may be limited when backing up diagonally, and may not detect any vehicle approaching from the left or right. If this occurs, the function may not activate a warning or brake your vehicle.
Always check your surroundings while backing up.
Rear Cross-Traffic Collision-Avoidance Assist may be limited when your vehicle is on a uphill or downhill slope, and may not detect any vehicle approaching from the left or right. If this occurs, the function may activate a warning and brake your vehicle even when not needed.
Always check your surroundings while backing up.
A: Structure, B: Wall
Rear Cross-Traffic Collision-Avoidance Assist may detect vehicles passing by in front of you when parking in reverse into a parking space with a wall or structure in the rear or side area. If this occurs, the function may activate a warning or brake your vehicle.
Always check your surroundings while backing up.
Rear Cross-Traffic Collision-Avoidance Assist may detect vehicles passing by behind you when parking in reverse into a parking space. If this occurs, the function may activate a warning and brake your vehicle even when not needed.
Always check your surroundings while backing up.
WARNING
Hyundai Tucson (NX4) 2022-2024 Owner's Manual: Calibrating the Battery Sensor
If the AGM battery is reconnected or
replaced, the ISG system does not
operate immediately. If you want to use
the system, the battery sensor needs to
be calibrated following the procedure.
1. Turn off the engine.
2. Disconnect all electronic devices
that were additionally installed afte ...
Hyundai Tucson (NX4) 2022-2024 Owner's Manual: Resetting the Power Liftgate
To reset the Power Lifgate:
1. With the engine off or running, put the
gear in P (Park).
2. Press the power liftgate open/close
inner button A and outer button B
simultaneously until a chime sounds.
3. Slowly close the liftgate manually.
4. Press the power liftgate open/close
outer but ...