Hyundai Tucson: Windshield Defrosting and Defogging / Manual Climate Control System
To defog inside windshield
.png)
1. Select any fan speed.
2. Select the desired temperature.
3. Press the defrost button (.png)
).
4. The outside (fresh) air is selected
automatically. The air conditioning
automatically operates if the mode
is selected to the defrost-level
position.
If the air conditioning and outside (fresh) air position are not selected automatically, press the corresponding button.
To defrost outside windshield
.png)
1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature to the hottest position.
3. Press the defrost button ().
4. The outside (fresh) air and air conditioning is selected automatically.
Windshield Defrosting and Defogging
WARNING
Do not use the defrost-level
position
during the cooling operation in extremely
humid weather. The outer surface of the
windshield may fog and reduce visibility,
causing a collisio ...
Automatic Climate Control
System
To defog inside windshield
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defrost button ().
4. The air conditioning turns on
according to the detected ambi ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: High Beam Assist (HBA). High Beam Assist Malfunction
and Limitations
High Beam Assist automatically adjusts
the headlights between high beam
and low beam depending on the light
detected from oncoming vehicles or
vehicles in front using the front view
camera.
Information
Refer to the "Driver Assistance Sensors"
section in Chapter 7 for the location and ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Roof Side Molding
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the roof side molding (A).
2.To install, ...
