Hyundai Tucson: Heating, Ventilation and Air Conditioning / Heater
- Heater Unit
- Heater Core
- Evaporator Core
- PTC Heater
- Temperature Control Actuator
- Mode Control Actuator
- Auto Defoging Actuator
PM Sensor
- Description
Monitor the air quality inside the vehicle in real time (PM sensor) and
display the status on the screen.Automatically operate when fine dust
concentration is high (Condition: Bet ...
Heater Unit
- Component Location
1. Heater unit assembly
- Components
1. Heater unit assembly2. Heater core cover3. Heater core assembly4. Mode control actuator [LH]5. DEF duct seal6. Evaporator a ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Mass Air Flow Sensor (MAFS)
- Description
MAFS uses a hot-film type sensing element to measure the mass of intake
air entering the engine, and send the signal to ECM.A large amount of
intake air represents acceleration or high load conditions while a small
amount of intake air represents deceleration or idle. The ECM ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Intake Actuator
- Description
The intake actuator is located at the blower unit. It regulates the
intake door by a signal from the control unit. Pressing the intake
selection switch will shift between recirculation and fresh air modes.
- Components
1. Intake actuator
- Inspection
1.Turn the i ...
