The driver’s and front passenger’s seats are equipped with adjustable head restraint for the passengers safety and comfort.
Adjusting the height up and down
To raise the head restraint:
1. Pull it up to the desired position 1.
To lower the head restraint:
1. Press and hold the release button 2 on the head restraint support.
2. Lower the head restraint to the desired position 3.
Removal/Reinstallation
To remove the head restraint:
1. Recline the seatback 2 with the seatback angle lever or switch 1. 2. Raise the head restraint as far as it can go.
3. Press the head restraint release button 3 while pulling the head restraint up 4.
WARNING
Never allow anyone to travel in a seat with the head restraint removed.
To reinstall the head restraint:
1. Recline the seatback.
2. Put the head restraint poles 2 into the holes while pressing the release button 1.
3. Adjust the head restraint to the appropriate height.
4. Return the seatback 4 with the seatback angle lever or switch 3.
WARNING
Always make sure the head restraint is locked in place and properly adjusted for the passenger.
Hyundai Tucson (NX4) 2022-2025 Service Manual: Schematic Diagrams
- Schematic Diagrams
Harness Connector
CONNECTOR NAMEPIN NUMBERNAMEFUNCTION
BATTERY1B +BATTERY +
2GNDBATTERY -
TORQUE1TORQUE2TORQUE1_SUB
&2ANGLE2PWM2
ANGLE3TORQUE4TORQUE2_SUB
SENSOR4POWER2SENSOR POWER2
5TORQUE3TORQUE2_MAIN
6POWER1SENSOR POWER1
7GND1GND1
8TORQUE1TORQUE1_MAIN
...
Hyundai Tucson (NX4) 2022-2025 Service Manual: C Pillar Garnish
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the C pillar garnish (A).
2.To install, ...