Hyundai Tucson: Braking System / Downhill Brake Control (DBC)
.png)
Downhill Brake Control assists when descending down a steep hill without having to depress the brake pedal.
The system automatically applies the brakes to maintain vehicle speed below a certain speed and allows the driver to concentrate on steering the vehicle down hill.
The system is turned off whenever the engine is turned off.
Press the button to turn on the system and press the button again to turn it off.
Hill-Start Assist Control (HAC)
Hill-Start Assist Control helps prevent
the vehicle from rolling backwards when
starting from a stop on a hill.
WARNING
Always be ready to depress the
accelerator pedal when starting from
a ...
System operation
Downhill Brake Control disabled. Control
vehicle speed
If Downhill Brake Control is not working
properly, this warning message appears
on the cluster display and you may hear a
warning so ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Purge Control Solenoid Valve (PCSV)
- Description
Purge Control Solenoid Valve (PCSV) is a solenoid valve and is
installed on the surge tank and controls the passage between the
canister and the intake manifold.The evaporative gases gathered in the
canister are delivered to the intake manifold when the PCSV is open by
ECM c ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: High Pressure Fuel Pump
- Specification
ItemSpecification
Coil Resistance (Ω)0.53 - 0.57 [20°C (68°F)]
- Circuit Diagram
Harness Connector
- Removal
1.Release residual pressure in fuel line.(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.Turn the ignition switch OFF ...
