Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Fuel Filler Door / Closing the Fuel Filler Door

1. To install the fuel tank cap, turn it clockwise until it “clicks” one time.

2. Close the fuel filler door until it is latched securely.

Information

To lock the fuel filler door, make sure the fuel filler door is completely closed. Press the lock button on the remote key or smart key to lock your vehicle. The fuel filler door also locks.

If the fuel filler door is not completely closed when the vehicle is locked, the fuel filler door is not locked.

WARNING

Automotive fuel is highly flammable and explosive. Failure to follow these guidelines may result in serious injury or death:

  • Read and follow all warnings posted at the gas station.
  • Before refueling, note the location of the Emergency Fuel Shut-Off, if available, at the gas station.
  • Before touching the fuel nozzle, eliminate the potential build-up of static electricity by touching a metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source, with your bare hand.
  • Do not use mobile phones while refueling. Electric current and/or electronic interference from cellular phones may potentially ignite fuel vapors and cause a fire.
  • Do not get back into a vehicle once you have begun refueling. You can generate a buildup of static electricity by touching, rubbing, or sliding against any item or fabric capable of producing static electricity. Static electricity discharge may ignite fuel vapors causing a fire. If you must re-enter the vehicle, once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle, or other fuel source, with your bare hand.
  • When using an approved portable fuel container, be sure to place the container on the ground prior to refueling. Static electricity discharge from the container may ignite fuel vapors causing a fire. Once refueling has begun, contact between your bare hand and maintain the vehicle until the filling is complete.
  • Use only approved portable plastic fuel containers designed to carry and store fuel.
  • When refueling, always shift the gear to the P (Park) position, apply the parking brake, and move the ignition switch to the LOCK/OFF position. Sparks produced by electrical components related to the engine may ignite fuel vapors causing a fire.
  • Do not use matches or a lighter and do not smoke or leave a lit cigarette in your vehicle at a gas station, especially during refueling.
  • Do not over-fill or top-off your vehicle tank, which may cause fuel spillage.
  • If a fire breaks out during refueling, get away from the vehicle, and immediately contact a gas station employee and then contact the local fire department.
  • If pressurized fuel sprays out, it can cover your clothes or skin and increase the risk of fire and burns. If the cap is venting fuel or if you hear a hissing sound, wait until the condition stops before completely removing the cap.
  • Always check that the fuel cap is installed securely to prevent fuel spillage in the event of a collision.

NOTICE

  • Do not spill fuel on the exterior surfaces. It may damage the paint.
  • If the cap needs to be replaced, only use a genuine HYUNDAI cap or the fuel system or emission control system may malfunction.
    Opening the Fuel Filler Door
    1. Move the gear to the P (Park) position, apply the parking brake, and move the ignition switch to the LOCK/OFF position. 2. Make sure that the driver’s door is unlocked. 3. Press the r ...

    Exterior Lights
    ...

    Other information:

    Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Recirculating Air when Washer Fluid is Used
    Recirculation mode automatically activates to reduce the scent of the washer fluid entering the cabin when the windshield washer is used. When it is shifted to the recirculation mode, the unpleasant scent may flow into the vehicle. However, in cold weather to prevent the windshield fro ...

    Hyundai Tucson (NX4) 2022-2026 Service Manual: SRS Control Module (SRSCM)
    - Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The SRSCM must decide whether to deploy the restraint system or not. After determining t ...

    © 2023-2026 Copyright www.htucson4.com