Seat belt systems should never be disassembled or modified.
Periodic inspection
All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible.
Keep belts clean and dry
Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents, or abrasives should not be used because they may damage and weaken the fabric.
When to replace seat belts
The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Consult an authorized HYUNDAI dealer for assistance.
Additional Seat Belt Safety
Precautions
Child Restraint System (CRS)Hyundai Tucson (NX4) 2022-2026 Service Manual: ETC (Electronic Throttle control) System
- Description
The Electronic Throttle Control (ETC) System consists of a throttle
body with an integrated control motor and throttle position sensor
(TPS). Instead of the traditional throttle cable, an Accelerator
Position Sensor (APS) is used to receive driver input. The ECM uses the
APS ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Rear Door Outside Handle
- Components Location
1. Rear door outside handle
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the plug hole ( ...