Hyundai Tucson: Blind-Spot Collision Warning (BCW) / Blind-Spot Collision Warning Settings
Blind-Spot Safety
.png)
With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety (for infotainment system type) from the Settings menu to select the following:
- If Warning Only is selected, Blind- Spot Collision Warning only displays a warning message and sounds an audible warning depending on the collision risk level. The function does NOT brake your vehicle to help avoid a collision.
- If Off is selected, Blind-Spot Collision Warning turns off.
.png)
If you change the setting from Off to Warning Only, the warning lights on the side view mirrors blink for three seconds.
In addition, if the engine is turned on when the function is set to Warning Only, the warning lights on the side view mirrors blink for three seconds.
When the engine is restarted with the function off, the "Blind-Spot Safety is Off" message may appear on the instrument cluster.
WARNING
If Off is selected, the function does NOT warn you to help avoid a collision.
Information
When the engine is restarted, Blind- Spot Collision Warning maintains its last setting.
Information
You can change the Warning Timing and Warning Volume settings or select Driving Safety Priority for Blind-Spot Collision Warning from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning uses
the rear corner radar to help detect
approaching vehicles in the driver’s blind
spot areas and warn you of a possible
collision with a warning message and
...
Blind-Spot Collision Warning
Operation
Vehicle detection
When a vehicle is detected in a blind
spot, the warning light on the side view
mirror illuminates.
Blind-Spot Collision Warning operates
when your vehicle speed is abov ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Paddle Shifter (Manual shift
mode)
The paddle shifter is available when the
shift button is in the D (Drive) position.
With the shift button in the D position
The paddle shifter operates when the
vehicle speed is more than 6 mph (10
km/h).
Pull the [+] or [-] paddle shifter once
to shift up or down one gear and the
sys ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Driving Assist mode
LKA/SCC/LFA/HDA
Displays the state of Lane Keeping Assist,
Smart Cruise Control, Lane Following
Assist and Highway Driving Assist.
For more information, refer to each
system information in Chapter 7.
Driver Attention Warning
Displays the state of Driver Attention
Warning (DAW).
For ...
