The air ventilation seats cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks.
When air ventilation is not desired, keep the switches in the OFF position.
While the engine is running, press the switch to cool the driver's seat or the front passenger's seat.
NOTICE
To prevent damage to the air ventilation seats:
- The air ventilation seat
automatically controls the seat
temperature depending on the
ambient temperature and the
set climate control temperature
when the engine is running. If
the air ventilation seat switch is
pressed, the air ventilation seats are
controlled manually.
- To use this feature, it can be
enabled from the Settings menu in
the infotainment system.
Select: Setup > Vehicle > Seat (or
Climate) > Warmer/Ventilation
Features > Link to Climate Settings
for Auto-Adjustment > Driver Seat
Warmer/Ventilation
- The air ventilation seat defaults
to the OFF position whenever the
ignition switch is ON. However, if
the Auto Comfort Control function
is on, the air ventilation seat turns
on and off depending on the
ambient temperature and the set
climate control temperature.
Hyundai Tucson (NX4) 2022-2025 Service Manual: Fuel Tank
- Removal
• Be careful not to damage the parts located under the vehicle
(floor under cover, canister, fuel tank) when raising the vehicle using
the lift.(Refer to General Information - "Lift and Support Points")
1.Release the residual pressure in fuel line.(Refer to F ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: C Pillar Garnish
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver or remover, remove the C pillar garnish (A).
2.To install, ...